Model 4299-4 Dual-Unit Rack-Mount Kit Installation Instructions
PA-943 Rev. C April 2021
3
2. After you align the arrows (2), pull the ends of the handle (1) away from the case.
3. Remove the screw that secures each mounting ear (3).
4. Pull down and out to remove each ear.
Figure 2: Mounting ear removal
5. From the bottom of the instrument, pull out the rubber feet and remove the screws (4), see the following
figure.
Figure 3: Instrument rubber feet removal
6. Store the handle, rubber feet, and hardware for future use.