Model TRX-1100V-CONN 3-Slot Male HV Triaxial Cable Connector Instructions
4
071368600 / September 2019
TRX-1100V-CONN assembly instructions
The TRX-1100V-CONN needs to be assembled before use. The following figures and instructions guide you
through this process. See the following figure and use it to help guide you step-by-step with the assembly.
Note that you will have to prepare the SC-22 triaxial cable in order to insert it in the TRX-1100V-CONN. The
internal triaxial cable wire must be stripped to the proper dimensions to ensure the correct insertion depth in the
connector. Excessive exposed conductor length presents electrical shock hazards to equipment and personnel.
If the strip length is too short, improper termination will result due to the lack of electrical conductive surface
area making contact with the terminal conductor.
Excessive exposed conductor length can result in electrical shock hazards to equipment and
personnel. To prevent electrical shock that could cause injury or death, make sure the
stripped wire is the correct length.
Figure 6: TRX-1100V-CONN exploded view
Equipment needed for assembly:
A cable ringing tool or wire stripper
Cleaning solvent for removal of exposed graphite lubricant
A torque wrench
