Operating Information
TSG 95 Service Manual
2–11
placed as far to the right as possible, the end character positions will be oc-
cupied by symbols. You will not be able to put characters in those posi-
tions until the message is repositioned to the left.
The V setting can range from ØØ (top of safe area) to 41 (bottom). The ver-
tical interval is indicated by V=vert; it is one
Y
key press above V=ØØ.
Only the first ID message line will fit into the vertical interval.
3. When the ID message is in the desired position, press any rectangular key to
resume normal operation. Note that unless the ID is saved (see “Saving ID
Messages,” below), changes to the ID position will be lost when the instru-
ment is switched off.
The contents and position of the current ID can be stored in one of eight ID#
locations for later recall or inclusion in an ID cycle.
1. Press Shift, then Recall. The display will change to resemble this illustra-
tion:
The first line of the current message will occupy the bottom half of the
display. You may scroll between the first and second lines of the message
with the
B
and
Y
keys.
2. Use the
A
and
"
keys to select the ID# location (1 through 8) in which the
current message is to be stored. Note that the previous contents of that loca-
tion will be overwritten.
3. When the desired storage number is displayed, press Enter to save the mes-
sage; press any rectangular key to abort the operation and return the instru-
ment to normal operation.
Recall the message later with the Recall key, as described next.4
1. Press the Recall key.
2. Use the
A
and
"
keys to select one of the ID message numbers, ID# 1
through ID# 8. The first line of the message will appear on the second dis-
play line; press the
B
key to see the second line of the message. For exam-
Saving ID Messages4
Recalling ID Messages
Summary of Contents for TSG 95
