Operating Information
2–12
TSG 95 Service Manual
ple, if the saved ID#1 is “TEKTRONIX TSG95 PAL/NTSC” The display
will first look like this:
Pressing the
B
key will change it to this:
Note that an empty character position will show as a black space in the
video, while the symbol indicates a “Blank.” Underlying video will show
through a Blank.
3. Press Enter to recall the ID message.
4. Press any rectangular key to exit the Recall menu and resume normal opera-
tion.
An ID cycle is a sequence of up to four stored ID messages. Once you set up a
cycle, it will be inserted in the video output if: ID is toggled On with the ID On/
Off key, and the ID CYCLE item of the ID menu is set to “on.” When those two
conditions are met, the TSG 95 display will indicate ID=cyc during normal op-
eration.
1. Edit and save the ID messages that you want to cycle (see “Editing ID mes-
sages,” page 2–10). Note the numbers of the IDs, and the order in which they
should appear.
2. Enter the ID menu by pressing Shift, then ID On/Off.
3. Press
B
twice to reach the CYCLE SETUP item, then press Enter. The dis-
play will resemble the following illustration.
4. Use the
A
/
"
keys to move the underline cursor to one of the four sequence
“time intervals.” The IDs will appear in the order that their numbers ap-
pear—from left to right—on the display.
Setting up an ID Cycle
Summary of Contents for TSG 95
