background image

Version 01   /   

p.52

AFA1000/2 MK2 Airflow Monitor

 

Installation & Operating Manual

9  WARRANTY

Seller warrants that this product, under normal use and service as described in the 
operator’s manual shall be free from defects in workmanship and material for a 
period of twelve (12) months, or the length of time specified in the operator’s manual, 
from the date of shipment to the customer. This limited warranty is subject to the 
following exclusion :-

a.

   Batteries and certain other components when indicated in specifications are 

warranted for a period of 90 days from the date of shipment to the customer.

b.

   With respect to any repair services rendered, Seller warrants that the parts 

repaired or replaced will be free from defects in workmanship and material, under 
normal use, for a period of 90 days from the date of shipment to the customer.

c.

   Seller does not provide any warranty on finished goods manufactured by others. 

Only the original manufacturer’s warranty applies.

d.

   Unless specifically authorized in a separate writing by Seller, Seller makes no 

warranty with respect to, and shall have no liability in connection with, any goods  
which are incorporated into other products or equipment by the Buyer. All 
goods returned under warranty shall be at the Buyer’s risk of loss, Seller’s factory 
prepaid, and will be returned at Seller’s risk of loss, Buyer’s factory prepaid.

The foregoing is IN LIEU OF all other warranties and is subject to the conditions and 
LIMITATIONS stated herein. NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS 
FOR PARTICULAR PURPOSE OR MERCHANTABILITY IS MADE.

THE EXCLUSIVE REMEDY OF THE USER OR PURCHASER, AND THE LIMIT OF LIABILITY 
OF SELLER FOR ANY AND ALL LOSSES, INJURIES, OR DAMAGES IN CONNECTION WITH 
THIS PRODUCT ( INCLUDING CLAIMS BASED ON CONTRACT NEGLIGENCE, STRICT 
LIABILITY, OTHER TORT, OR OTHERWISE ) SHALL BE THE RETURN OF THE PRODUCT 
TO THE FACTORY OR DESIGNATED LOCATION AND THE REFUND OF THE PURCHASE 
PRICE, OR, AT THE OPTION OF THE SELLER, THE REPAIR OR REPLACEMENT 
OF THE PRODUCT. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY SPECIAL, 
INCIDENTAL OR CONSEQUENTIAL DAMAGES.SELLER SHALL NOT BE RESPONSIBLE 
FOR INSTALLATION, DISMANTLING, REASSEMBLY OR REINSTALLATION COSTS OR 
CHARGES. NO ACTION, REGARDLESS OF FORM, MAY BE BROUGHT AGAINST THE 
SELLER MORE THAN ONE YEAR AFTER THE CAUSE OF ACTION HAS ACCRUED.

The purchaser and all users are deemed to have accepted the terms of this 
LIMITATION OF WARRANTY AND LIABILITY, which contains the complete and exclusive 
limited warranty of Seller. This LIMITATION OF WARRANTY AND LIABILITY may not be 
amended or modified nor may any of its terms be waived except by a  writing signed 
by an authorized representative of the Seller.

Summary of Contents for AFA1000/2 MK2






















































Reviews: