S E S S I O N I N I T I A T I O N P R O T O C O L ( S I P ) C O N F I G U R A T I O N
V I A W E B
Rev H
145 of 244
Figure 15-1 SIP Configuration Page
2.
Set the values for
SIP Server Settings
, Gateway Settings,
NAT Settings
and
STUN
Server Settings
according to how the VoIP Gateway is connected to the network as
described below.
•
If the VoIP Gateway does not reside behind a NAT server and has an outbound (global)
IP address, you only need to set the
SIP Server
IP address
,
Port
and
Domain Name
fields. To activate the secondary SIP server, enter the IP address and port of the
secondary server in the respective fields. The primary and secondary server IP address
can be either a domain name or an IP address. When using a domain name (SRV DNS is
not supported with this feature), the port fields MUST BE SET.
•
If the VoIP Gateway resides behind a NAT server and wishes to communicate with the
SIP server via a
Proxy
server:
•
Set the
SIP Server
IP address
and
Port
fields to the values of the Proxy server’s IP
address and port.
•
Set the
Domain Name
to the SIP Server’s Domain name.
•
If the VoIP Gateway resides behind a NAT server and wishes to communicate with the
SIP server using
STUN
support:
Summary of Contents for AC - 232 - TX
