S E S S I O N I N I T I A T I O N P R O T O C O L ( S I P ) C O N F I G U R A T I O N
V I A W E B
Rev H
146 of 244
•
Set the
SIP Server
IP address,
Port
and
Domain
Name
fields to the values of the
SIP server’s IP address, port and Domain Name.
•
Set the
STUN
Server IP address
and
Port
fields to the IP and port of the STUN
server.
•
If the VoIP Gateway resides behind a NAT server and the outbound (global) IP is
Static
the VoIP Gateway could be configured to use the outbound (global) IP also for the SIP
protocol.
•
Set the
SIP Server IP address,
Port
and
Domain
Name
fields to the values of the
SIP server’s IP address, port and Domain Name.
•
Set the
NAT IP address
field to the value of the VoIP Gateway’s outbound IP
address.
3.
RTP/RTPC port base
by default is 16384. The default port value for the RTP/RTPC
ports could be configured to adapt to NAT Server or Router’s requirements.
4. The instructions for configuring the
Dial Plan
are identical to the corresponding
instructions for the H.323 Protocol. See on page
5. Click
Save SIP Settings
.
NOTE
Asterisks are used to mark fields where information must be provided
(required fields). “Port” and “Domain Name” are such fields in the SIP
Configuration page.
16.2
SIP Extensions
To configure SIP Extensions:
1. In the horizontal menu bar of the SIP Configuration page, select
SIP Extensions
. The
SIP Extensions Configuration page appears (
). The fields and options
available in this window are described in the table below the figure.
2. Check the appropriate boxes and fill in the fields as needed. Then click
Save SIP
Extension Settings
.
Summary of Contents for AC - 232 - TX
