S I P C O N F I G U R A T I O N V I A T E L N E T
Rev H
211 of 244
Command
Description
set 1port
Sets the SIP port for line 1.
set 2port
Sets the SIP port for line 2.
set 1aec
Sets the AEC for line 1.
set 2aec
Sets the AEC for line 2.
set 1username
Sets the user name for line 1.
set 2username
Sets the user name for line 2.
set 1password
Sets the password for line 1.
set 2password
Sets the password for line 2.
set nat_ip
Sets the NAT IP address.
set rtp_port
Sets the RTP/RTCP port base.
set stunserver_ip
Sets the STUN server’s IP address.
set stunport
Sets the STUN server port number.
26.2.1 Entering into SIP Configuration Mode
The
sip
command, in Global Configuration mode, is used to access SIP Configuration mode.
The prompt-line
IPG.Config.SIP >
indicates SIP Configuration mode.
Command Syntax
IPG.Config
>
sip
IPG.Config.SIP >
IPG.Config
>
si
IPG.Config.SIP >
26.2.2 Setting the SIP Server's IP Address
The
set sipserver_ip
command, in SIP Configuration mode, sets the SIP server's IP address.
The
no
form of the command removes the SIP server’s IP address.
If a Domain name is entered for the SIP Server IP, DNS requests will be completed to acquire
the IP and port of the Server.
Command Syntax
IPG.Config.SIP >
set sipserver_ip
A.B.C.D
IPG.Config.SIP >
no set sipserver_ip
IPG.Config.SIP >
se
sips
{
e
|
d
}
IPG.Config.SIP >
no sips
Argument Description
A.B.C.D
IP address of the SIP server or server’s Domain name.
Summary of Contents for AC - 232 - TX
