C O N F I G U R I N G T H E V O I P G A T E W A Y V I A T H E W E B
Rev H
89 of 244
5. For Fixed Auto Configuration, set the
polling
interval in hours.
6. To select Fixed (Provisioned) Auto Configuration, supply the IP address of the
HTTP/TFTP server
and the name of the “root” configuration file directly to the
Gateway, instead of through the DHCP options. During boot, and at defined polling
periods, the Gateway will poll the HTTP/TFTP Server for a configuration file and will
determine if an upgrade is needed.
7. Set the
Server IP
address.
8. Set the
file name
(“root” configuration file) to download.
9. Set the Server protocol (HTTP or TFTP).
11.4
VLAN Configuration
To set VLAN configuration on the VoIP Gateway unit:
1. In the vertical menu bar of the current VoIP Gateway Web page, select
VLAN
.
The VLAN Configuration page appears (
Figure 10-5
).
NOTE
The 282/482 product supports 8 LAN ports and up to sixteen VLANS.
The 483S/483D products supports 8 LAN ports, one/two fiber optic
ports and up to sixteen VLANS. The 232 product supports four LAN
ports and up to eight VLANs.
2. Proceed as described in the following subsections.
Summary of Contents for AC - 232 - TX
