GW-482S INSTALL ATION GUID E
15
MN100143 Rev B
Table 1: LAN Wire Connections
Connect the -
To the -
Orange/White wire
Left of the Orange mark
Orange wire
Right of the Orange mark
Blue/White wire
Left of the Green mark
Blue wire
Right of the Green mark
Figure 18: Type-110 Tool inserting 10/100BaseT/TX
3.
Push the DT MF telephone wires through the ingress at the bottom of the unit.
4.
Use the Type-110 insertion tool to connect the DT MF wires to either side of the
blue
mark
on the
P1
and
P2
connectors on the Patch Panel. Up to 5 phones can be connected in
parallel to each connector. (For
GW -482S-4-
x you may also connect P3 and P4). See
picture below.
Figure 19: Type-110 Tool inserting DTMF Telephone Wires
5.
Plug in the AC connector.