3200 Series Standalone and 3200 Series 1+1 System Installation Guide
8
2.1
Package Contents
Depending on your system requirements, you may receive one or more of the following items:
•
2.1.1 “3200 Series Standalone Package Contents” on page
•
2.1.2 “3200 Series 1+1 System Package Contents” on page
9.
•
10.
The contents of these devices are described in the following sections.
2.1.1
3200 Series Standalone Package Contents
TMG3200, TSG3200, TMGIP3200
In the box, you will find the following items:
•
One 3200 series unit:
TMG3200 (TMG3200-TE, TMG3200-DS3, or TMG3200-STM1), or TSG3200 (TSG3200-TE,
TSG3200-DS3), or TMGIP3200. See figure
2.
•
One set of mounting brackets and screws, used to mount the 3200 series unit to a 19" rack.
•
One DB-9 to RJ-45 adapter to interface the serial port of your computer with the RJ-45 port of the
3200 series unit.
•
Three CAT5 Ethernet (blue) straight cables (male-male), 3 meters in length.
•
One Important Notice (two-sided document containing pertinent product serial numbers, and other
important information).
•
One Product Warranty.
•
One packing slip.
•
Two AC power cables
Specifically with the 3200-TE unit, you will also have:
•
One or two patch panel(s)
•
Two SCSI cables per patch panel.
Not included
•
A 19” equipment rack. The 3200 series unit must be installed on a 19” wide equipment rack.
