49
Installing the Equipment
2.7
Verifying the LED Status Indications
Front of Unit
When the equipment is powered, verify the front panel to determine that the LED indication is normal.
See
49.
Table
2.5
320000 Series Unit Displays
Note
An alarm will sound if one of the power supplies is faulty. There is no alarm button to
disable the alarm. To stop the alarm, you must remove the faulty power supply.
Figure
2.19
LED
Description
Green - Steady
• Ready
Green - Blinking
• Starting up
• Shutting down
Orange - Steady
• Shut down (stopped)
Red - Blinking
• Fault condition