16
TMG800 and 1 Installation Guide
2.4.4
Powering Up
The TMG3200 is furnished with two AC or DC power connections. Only once all other equipment
installation work has been completed should the TMG800 be powered up.
2.4.4.1
Connecting to AC Power
Prerequisites
To power the TMG800, you will need:
•
One to two power sources.
•
Two power cables for the TMG800.
The TMG800 AC model is furnished with two AC power connectors.
To connect the TMG800 to AC Power:
1. Connect an AC power cable between the AC connector of the TMG800 and an AC supply. See
Note
If the TMG800 features a second power supply and it is not connected to an AC power
source, press the green button located at the rear of the unit to disable the audible alarm.
See figure 2.6 on page 16.
2. Power up the TMG800 by turning on its power switch(es).
Figure 2.6
AC Power Connection
AC
Power
Source 1
AC
Power
Source 2
Standalone
Summary of Contents for Tmedia TMG800
