TECHNICAL DATA
The
microwave movement detector controls the opening of factory gates and automatic doors.
It can be installed at a height ranging from 2,5 to 4 metres and guarantees the surveillance of an
area from 3 to 30 square metres .
The device will be automatically activated by moving persons or vehicles within the controlled
perimeter.
has been developed using planar technology, and can be set in
(to detect movement either in forward or backward direction) or
(activated by movement in both directions).
A microprocessor processes the signals received – generated through a Doppler effect – and sends
an OK to the opening command.
A LED on the front panel indicates that movement has taken place inside the controlled area.
RAR
RAR
mono-directional
bi-directional
NOTE: A SELV power source must be used (certified power supply unit or safety transformer) in compliance
with CEI EN 60950-1.
We hereby declare that RAR complies with the essential requirements of Directive 99/05/EC (R&TTE)
harmonised radio standard pursuant to Art. 3.2 of Italian Law No. 269 dated 9.5.2001: EN300440-2 V 1.1.2
RAR
ENGLISH
Power voltage
12 – 24 V
AC
/12 - 24 V
DC
Power current
max. 40 mA
Operative frequency
24,000-24,250 GHz
Output Power (EIRP)
≤
20 dBm
Range
1 – 7 m adjustable
Relay control time
1 – 6 s adjustable
Degree of protection
IP 65
Installation height
max. 4 m
Detectable speed
0.1 m/s minimum
Relay contact
1A - 24 V
AC/DC
Vertical directionality
0-60°
Horizontal directionality
+/- 45°
Operating temperature
- 20 °C to + 50 °C
Dimensions/weight
160x95x110 mm / 500 g
Warranty
24 months
