elmeg DECT200 Multicell System / en / elmegDECT200M_en / introduction.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
6
elmeg DECT200 Multicell System
bintec elmeg
Introduction
Introduction
elmeg DECT200 Multicell System is a DECT multicell system for connecting DECT base stations
to a VoIP PABX. It combines the options of IP telephony with the use of DECT telephones.
The following illustration shows the components of the elmeg DECT200 Multicell System and
the way the system is embedded in the IP telephone environment:
u
DECT Manager elmeg DECT200M
Central management station for managing the DECT network. One DECT Manager must be
used for each installation. The DECT Manager
– Manages up to 20 DECT base stations
– Manages up to 100 handsets on multicell systems
– Enables division into subnets (
formation)
– Represents the interface to an IP PABX (e.g., elmeg IP1X0)
The DECT Manager offers a Web user interface for the configuration and administration of
the DECT network.
Getting started with the DECT Manager
Configuring the DECT network using the Web user interface
u
elmeg DECT200 DECT base stations
– These are the cells of the DECT telephone network.
– Each base station can manage up to eight calls simultaneously.
Getting started with the base stations
Configuring the base stations
PABX
VoIP, ISDN, analogue
DECT
base stations
elmeg
DECT200
DECT Manager
elmeg DECT200M
LAN
Configuration via
Web interface
Handover & roaming
elmeg IP telephones
e.g., elmeg IP 140
elmeg
Handsets
Summary of Contents for BinTec Elmeg DECT200
Page 3: ......
