elmeg DECT200 Multicell System / en / elmegDECT200M_en / Glossary.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
113
elmeg DECT200 Multicell System
bintec elmeg
Glossary
IP pool range
Range of IP addresses that the DHCP server can use to assign dynamic IP addresses.
L
LAN
Local Area Network
Network with a restricted physical range. A LAN can be wireless (WLAN) and/or wired.
Local IP address
The local or private IP address is the address for a network component in the local network
(LAN). The network operator can assign any address they want. Devices that act as a link from
a local network to the Internet (gateway or router) have a public and a private IP address.
See also
.
Local SIP port
See
M
MAC address
Media Access Control address
Hardware address by means of which each network device (e.g., network card, switch,
phone) can be uniquely identified worldwide. It consists of six parts (hexadecimal numbers)
separated by "-" (e.g., 00-90-65-44-00-3A).
The MAC address is assigned by the manufacturer and cannot be changed.
Mbps
Million bits per second
Unit of the transmission speed in a network.
MRU
Maximum Receive Unit
Defines the maximum user data volume within a data packet.
MTU
Maximum Transmission Unit
Defines the maximum length of a data packet that can be carried over the network at a time.
Music on hold
Music on hold
Music that is played while you are on a
The waiting participant hears music while on hold.
N
NAT
Network Address Translation
Method for converting (private)
to one or more (public) IP addresses. NAT
s
(e.g., VoIP telephones) in a
to be
concealed behind a shared IP address for the
.
VoIP telephones behind a NAT router cannot be reached by VoIP servers (on account of the
private IP address). To "get around" NAT, it is possible to use either
in
the VoIP telephone, or for the VoIP provider to use an
If an outbound proxy is made available, you must allow for this in the VoIP settings for your
phone.
Summary of Contents for BinTec Elmeg DECT200
Page 3: ......
