elmeg DECT200 Multicell System / en / elmegDECT200M_en / MWI.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
46
elmeg DECT200 Multicell System
bintec elmeg
Displaying messages
E-mail notifications
You can receive e-mail-messages on your handset if the name of the incoming e-mail server and
your personal access data (account name, password) have been stored on the DECT Manager
using the Web configurator and you have specified that you want to be notified when a new e-
mail arrives (
Prerequisite:
The telephone system connects to the incoming e-mail servers regularly and
checks for new messages. This connection is made every 15 minutes by default, although the
administrator can change this default setting (
Your handset display will show when a new e-mail message has been received. On the elmeg
DECT130, for example, an advisory tone sounds, the message key
f
flashes and the
Ë
symbol is displayed in the idle display.
Using the handset, you can display the sender, date/time of receipt, the subject and the
message text (abbreviated if necessary) for each e-mail in the incoming e-mail list (
Opening the incoming e-mail list
Prerequisites:
u
You have set up an e-mail account with a provider.
u
The incoming e-mail server uses the POP3 protocol.
u
The name of the incoming e-mail server and your personal access data (account name,
password) are stored in the DECT Manager for your handset (
On the handset:
v
¢
Ë
Messaging
¢
Or, if new e-mail messages have been received (message key
f
flashes):
f
¢
The phone establishes a connection to the incoming e-mail server. A list of e-mail messages that
are stored there is displayed.
New unread messages appear above old read messages. The most recent entry appears at the
head of the list.
Please note
If new e-mail messages have been received, pressing the message key
f
will display
them in the
list.
Please note
If you have also activated the authentication of the phone with the incoming e-mail server
via a secure connection in the Web configurator (TLS authentication) and this fails, the e-
mail messages are not downloaded to your phone.
In this case, pressing the flashing message key
f
will display the message
Certificate
error -
.
¤
Press the display key
§OK§
to confirm the message.
¤
The
Security Settings
Web page on the DECT Manager (
) tells you why the
secure connection could not be established and what you can do.
Summary of Contents for BinTec Elmeg DECT200
Page 3: ......
