elmeg DECT200 Multicell System / en / elmegDECT200M_en / web-conf.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
60
elmeg DECT200 Multicell System
bintec elmeg
Configuring the system on the DECT Manager
Working area
Depending on the function selected in the navigation area, information or dialogue boxes are
displayed in the working area that allow you to make or change your DECT network settings.
Making changes
You can make settings via input fields, lists or options.
u
There may be restrictions regarding the possible values for a field e.g., the maximum number
of characters, entering special characters or certain value ranges.
u
To open a list, click
. You can choose between default values.
u
There are two kinds of options:
– Checkboxes: You can activate one or more options from a list. Active options are indicated
by
, non-active options by
. You can activate an option by clicking
. The status of
the other options in the list does not change. You can deactivate an option by clicking
.
– Alternative options (radio buttons): The active option in the list is indicated by
, and the
non-active by
. You can activate an option by clicking
. The previously activated
option is deactivated. You can only deactivate an option by activating another option.
Applying changes
As soon as you have made your change on a page, save and activate the new setting on the
DECT Manager by selecting
Set
.
If your entry does not comply with the rules for this field, an appropriate error message is
displayed. You can then repeat the input.
Buttons
Buttons are displayed in the bottom section of the working area. Depending on the current
function of a Web page, various buttons are displayed. The functions of these buttons are
described in the respective function below.
The most important buttons are:
Cancel
Reject changes made on the Web page and reload the settings that are currently saved in the
DECT Manager to the Web page.
Set
Store changes made on a Web page in the DECT Manager.
Caution
Changes that have not been saved on the DECT Manager are lost if you move to another
Web page or the connection to the Web configurator is lost, e.g., due to exceeding the time
limit (
V
‰
‰
.
Summary of Contents for BinTec Elmeg DECT200
Page 3: ......
