elmeg IP130 / en / elmegIP130_v1 / web_configurator.fm / 30.08.2012
V
e
rsion 2, 27.0
5
.2010
102
elmeg IP130
Teldat
Configuring phone settings via the Web configurator
Security settings
This screen is where you create security settings for your phone.
Settings
¢
Network and Connections
¢
Security Settings
Remote management
¤
Select whether you want to
Allow access from other networks to the WEB configurator
(
Yes
) or not (
No
).
If you permit
Remote Management
, this increases the risk of unauthorised access to your
device settings.
¤
Select the network protocol to be used for the communication:
–
TLS
(Transport Level Security)
–
UDP
(User Datagram Protocol
–
UDP
(Transmission Control Protocol)
Security settings
Secure Real Time Protocol (SRTP)
The Secure Real-time Transport Protocol (SRTP) allows voice data transferred with the Real-time
Transport Protocol (RTP) to be encrypted.
¤
Activate or deactivate the
Secure Real Time Protocol (SRTP)
.
¤
Select whether you want to
Accept Non-SRTP Call
or not. If this function is activated, you
also accept incoming calls from a number that does not use SRTP.
Saving settings
¤
Click on
Save
to save your settings on the
Security Settings
screen.
Telephony
menu provides the following setting options:
u
This is where you can configure your VoIP connections and establish new connections.
u
On this screen you can optimise the voice quality of your VoIP connections.
u
On this screen you can define options for call divert and activate or deactivate this function.
u
The Dialling Plans screen is where you can define the use of area codes and VoIP connections
for outgoing phone calls and enter the international and local area code for your phone con-
nection.
u
You can use the blacklists to block incoming calls from selected numbers and also to block
all anonymous calls.
u
This is where you define where recordings of conversations are saved.
u
On this screen you can configure your network mailbox.