GetMagic
11
5.2.4.5 Enabling network wide inclusion
1.
On device configuration page open settings menu in top-right corner and select “Select NWI state”.
2.
When dialog is opened use checkbox turn on/off wide network inclusion feature.
5.2.4.6 Setting network inclusion/exclusion timeout
1.
On device configuration page open settings menu and select “
Set network timeout”.
2.
When dialog is opened enter duration of network inclusion/exclusion timeout provided in seconds.
3.
Press OK to confirm
5.3 Controlling Devices
5.3.1 Control devices by type
1.
Select “Device by type” option on main application menu.
2.
To filter devices by type select one of the types on left side menu.
3.
To remove filter press on house icon in top-left corner.
4.
Additionally to filtering by device type location filter can be applied by selecting “
DEVICE LOCATION” option in
top-right corner.
5.
Main device controls and information is presented in form of quick controls in main part of the screen. (see Fig 6)
Fig 6 Device control
5.3.2 Control devices by location
1.
Select “
Device by location” option on main application menu.
2.
To filter devices by location select one of the types on left side menu.
3.
To remove filter press on house icon in top-left corner.
4.
Additionally to filtering by device type location filter can be applied by selecting “
DEVICE TYPE” option in top-right
corner.
5.
Main device controls and information is presented in form of quick controls in main part of the screen (see Fig 6).
5.3.3 Advanced device configuration
1.
Select “
Device by type” or “Device by location” on main application menu.
2.
Find device and perform long click on device quick control to open advanced device configuration screen.
3.
Any updates to device properties are immediately applied to gateway and device.
5.3.4 Special features
Z-Wave devices can be linked to an identifier (ID) and to a scene created even if the gateway is not reachable.
This feature is available only on devices which have the ID visible in a submenu, like the remote control (ZHF01)
connected to the wall socket (ZHS13).
Insert the ID to its related sensor/node, the nodes will be reciprocally linked.
5.4 Scene configuration
Scene mechanism allows configuring device state presets and events that activate device presets. Scene can
have one or more devices added to it and zero or more activation events which are called triggers. Two or more
triggers are related with OR logic, if this happens or that happens. Scene can be disabled in which case triggers