TELE System - IoT
12
from that scene are not being processed. Scene can additionally be configured to send email notification.
Notification is sent to account email address..
If needed, it is advisable creating a “counter-scene”. For instance a Scene “Window Open -> Lights ON”, could
have a counter-scene “Window Close -> Lights OFF”.
5.4.1 Creating new Scene
1.
To enter scene configuration screen press “
Scenes” option on main application screen.
2.
On scene configuration screen press “
Add” option located in top-right corner.
Adding triggers
3.
To add new device trigger to scene press “
Add” option in top-right corner (see Fig 7) and select “Device trigger”
option
a.
On “
Device trigger” dialog select device feature that will initiate scene activation.
b.
Select one of three operators “
Equals”, “Less then” or “Greater then”.
c.
Configure value for comparison.
4.
To add new time trigger to scene press “
Add” option in top-right corner and select “Time trigger” option
a.
On “Time trigger” dialog select activation time.
b.
Select whether it is one time event in which case select date when event should occur.
c.
In case of event that is repeating select “
Weekly” checkbox and select days of the week when to
execute scene.
5.
Press OK to add trigger.
6.
Repeat steps 3-5 until all activation events are added.
7.
Press “Next” button in lower-right corner to proceed to device presets.
Adding devices state presets
8.
Add new device preset to scene by pressing “
Add” option in top-right corner.
9.
On “
Add device” dialog select device and press OK. Devices can be filtered by type or location selecting
appropriate button on top of dialog (see Fig 7).
10.
Once added to scene device quick control will be available for state configuration.
11.
Repeat steps 9 – 11 until all device presents are configured.
12.
To finalize scene press in lower-right corner.
Fig 7 Scenes creation and management
Setting scene name
13.
Provide scene name in presented dialog and press OK button.