GetMagic
5
Every field marked with (*) is mandatory. Other inputs related to account details are optional and can be added
at any time.
At the end account registration information is submitted to Cloud service. If user name and password are
validated activation link will be sent to user email. It can take few minutes before mail is received, if not please
check the Spam folder of the mailbox. Confirm account activation by pressing on provided link.
4.3 Adding gateway to User account
Connecting gateway to user account can be done using both mobile application and Cloud service. To connect it
using mobile application open GetMagic application and login to user account.
Select Home Installation option from main menu. In home setup screen select “
Add new gateway” option
located in top right corner. The new gateway wizard will be opened requiring gateway SID (Secure ID) and
gateway symbolic name (see Chapter 5.2.1 ).
Password is a unique identifier of every gateway device. It is represented with 12 characters (e.g.
7CDD907E2AA3) and can be found on the device package.
SID (Secure ID) is a secret unique identifier of gateway. It is represented by 16 characters (e.g.
00000012HG5J93AC). This number is provided in the booklet located inside device package and it should be
known only to the user. It is important to keep it secret.
Once the required information is entered press next button to continue. If the gateway SID is matched on Cloud
and it is not assigned to any other user account, the gateway will be added. The gateway will not become active
before it connects to the Cloud at least once after adding it to account.
To proceed with home setup wizard, the gateway must be connected to the local network. If this is not the case,
press “
Skip” button to stop further configuration. Later, the user can connect the gateway to same network and
use “Edit gateway” option on the newly added gateway to re-enter configuration wizard.
4.4 Home Setup
The gateway configuration option is available by pressing the “
Home setup” option on the main menu of the
Client application or in the Cloud application. In the home setup screen use the long press on the gateway to get
the options menu and select “
Edit” option. This option will open the gateway configuration wizard.
In first step the user can change the gateway symbolic name. Once added to the user account, the gateway SID
cannot be changed. Press “
Next” button to proceed to home layout setup step.
In second step user can manage floors and rooms assigned to them. Adding new floors and rooms is available
using “
Add” option in top right corner. Any room or floor can be deleted by performing long press action on it.
Once satisfied with home layout press “
Next” button to proceed to the device management step.
In this step the user can add new devices by pressing “
Find devices”. This action will put all networks in mode
where devices can be added. Follow device specific instructions on how to perform device inclusion process. On
the same screen, devices can be deleted from gateway by performing long press action on the device and
selecting “
Delete” option..
Z-Wave devices that were not excluded from previous network must first be excluded. This is possible to do by
selecting “
Exclude device” option from advanced options menu (located in top right corner of the screen).
Once done with gateway configuration, press “
Next” button to finish home setup wizard.
