TeleAdapt MediaHub Mini
|
Installation Guide
13
enabled. If a suitable serial protocol cannot be enabled then the
TeleAdapt Serial Protocol will be enabled by default. If using serial
communication then CEC operation should be disabled on the
TV configuration.
HDMI Input
The HDMI input on the MediaHub Mini is suitable for connecting
a range of HDMI sources. The resolutions supported will be
determined by the TV but cannot exceed 1080p60. The MediaHub
Mini does not explicitly support 3D formats although, depending
upon the TV, 3D side-by-side and 3D top-and-bottom signals may
be supported. 3D frame-packing is not supported.
The HDMI input will generate an auto-switch event when it detects
+5V from the HDMI source (when a source is plugged in). CEC from
the source device is not supported by the MediaHub Mini nor is it
passed to the TV. The prevents undesirable side effects that could
otherwise be introduced by guest devices.
Bluetooth
The MediaHub Mini supports Bluetooth audio streaming using A2DP.
This profile is commonly supported by most smart phones, tablets
and laptops and will allow audio files to be streamed and played
back via the MediaHub Mini to the TV.
Using Bluetooth is a simple 2 step process:
1.
Pairing and Connection
2.
Playback
To initiate pairing press the Bluetooth button for about 3 seconds,
the button will flash slowly. Under the Bluetooth settings on the
mobile device or laptop look for a device called “MediaHub” and
connect to it. When the connection is established the button will
be lit continuously.
Continued on page 10
