TeleAdapt MediaHub Mini
|
Installation Guide
14
Select the music you wish to hear and and play it. The MediaHub
Mini will generate an auto-switch event and the button will ‘blip’
every 3 or 4 seconds.
Audio Input
Connect an audio source and select play. The MediaHub Mini
detects audio using a sampling algorithm to ensure the volume is
set high enough on the source device. Because of the sampling
algorithm there may be a short delay in detecting absence and
presence of audio sources.
USB High Current Charging
The USB port with 2 lightning bolts is configured for high current
charging and is suitable for charging with most mobile phones
and tablets.
Standard USB Charging and USB Passthrough
The USB port with 1 lightning bolt is configured as a standard USB
charging port which is suitable for a wide range of devices. However
this port is generally not suitable for charging tablets. Some mobile
phones may not charge using this port either. This USB port can
optionally be connected to a USB host device (for example the
TV if it supports USB). If the USB host supports media playback,
then inserting a USB memory stick (or similar device that supports
USB target disk mode) with media files into this USB port will allow
a media player in the USB host to access and playback content.
To utilise this feature requires removal of the yellow mini-USB plug
on the rear of the MediaHub Mini and connection of a USB cable
between the MediaHub Mini rear mini-USB socket and the USB
host device.
