background image

 

Model 458-LM-E1-36-04 Multi-Standard Local Loop Simulator 

Page 1   

Introduction 

 
The  Model  458-LM-E1-36-04  Multi-Standard  Local  Loop  Simulator  is  the  ideal  solution  for 
ADSL,  ADSL2,  ADSL2+,  and  VDSL2  chip/modem/DSLAM  testing.  This  single-pair  loop 
simulator can simulate PE04 for ADSL, ADSL2, ADSL2+ and VDSL2 (including Profile 35b).    
 
This versatile local loop simulator is  plugged into our Model 458-3SLB (3-Slot) or 458-CC-16 
(16-Slot)  chassis  where  settings  are  controlled  by  a  convenient  keypad  located  on  the  front, 
RS-232, Ethernet or IEEE-488(GPIB). In addition, the user-friendly 458 Universal GUI may be 
used for remote c

ontrol. The modular design of Telebyte’s products allows the 458-LM-E1-36-

04 to be combined with other line modules for a wide variety of test configurations. 
 
 
 
 
 
 

Main Features: 

 

  Simulates PE04 as specified in ETSI TS 101 388 

  One Channel 

  Bandwidth DC to 36 MHz 

  Line lengths from 0 

– 9,000 m in 10-m steps 

  Solution for ADSL, ADSL2, ADSL2+, & VDSL2 (including Profile 35b)  

  Ideal for testing TR-114 Issue 3 

  Plugs into our Model 458-CC (16-slot) or 458-3SLB (3-Slot) chassis 

  Loop  Lengths  controlled  manually  via  front  panel  of  chassis,  or  remotely  via  RS-232, 

Ethernet, IEEE-488 (GPIB), or 458 Universal GUI   

 
 

 
 

 

  
 

Summary of Contents for 458-LM-E1-36-04










Reviews: