19
www.behnke-online.com
Instructions Secure Ethernet Adapter / Secure Door Adapter
Secure Ethernet Adapter
GB
Wiring diagram
The following diagram portrays a standard form
of installation with an IP door intercom on the
outside connected to an AC powered open door
function.
1.3. Set up
*
Where relay 2 is used, the IP basic electronics needs to be configured accordingly. Cf. web-fronted (IP)
**
Open door device not included
Secure inside area
Potential-free open function, e.g.
for a signalling unit or an additional
control unit to open the door
to sabotage contact
inside the door intercom
Outside area
= 15 V
Ethernet connection
with PoE
-
+
Power supply for open door device
(on site)
to switch
10 11 12 13 14 15 16 17
to door
intercom
LED monitoring
Reset
Relay 1
IP basic electronics
*
(e.g. Behnke power
supply unit 20-9585)
1 2 3 4 5
6 7 8 9
Open door
function
**
