GB
24
www.behnke-online.com
Instructions Secure Ethernet Adapter / Secure Door Adapter
Secure Door Adapter
GB
Wiring diagram
The following diagram portrays a standard
form of installation with a door intercom on the
outside connected to an AC powered open door
function.
2.3. Set up
Secure inside area
Outside area
= 15 V -
+
Power supply for open door
device (on site)
10 11 12
Relay 1
IP basic electronics
*
(e.g. Behnke
power supply
unit 20-9585)
1 2 3 4 5 6
7 8 9
to sabotage contact
inside the door intercom
*
Where relay 2 is used, the IP basic electronics needs to be configured accordingly.
Cf. web-frontend (IP) or technical manual for analogue installations respectively.
**
Open door device not included
Open door
function
**
Potential-free open function,
e.g. for a signalling unit or
an additional control unit
to open the door
