37
www.behnke-online.com
Instructions Video 2-wire transmitter and receiver
GB
General Information
6.4. Turn on / off
Prior to enabling the power supply:
▸
Please check if the material delivered meets
the desired requirements by checking the
labels against the operation data according
to the description in chapter “Operation
Properties”
▸
Please check that both the transmitter and
the receiver as well as all other components of
the system are closed, so that direct contact
to live parts is impossible.
▸
Please make sure that all parts are fastened in
a steady and reliable way.
▸
Please make sure that the power sources and
extension cords possibly in use can cope with
the system power drain.
Turning on: the receiver does not have a
power switch. Connect the device to the power
supply voltage.
Turning off: Unplug the power supply unit.