7
CELL ROUTE-GSM
Getting Started
Answering Incoming calls
Lift handset and call is connected.
Missed Call
If both L.E.Ds are flashing simultaneously, this is identifying a missed call.
Switching Off the CellRoute
When switching off the CellRoute-GSM you must first unplug the power cord
from the CellRoute-GSM itself, otherwise this will activate Battery back-up.
Battery Backup
In the event of mains failure the CellRoute-GSM’s battery backup will
automatically activate, giving a standby time of approximately 12 hours and a
talk time of 2 hours (these figures are subject to humidity and temperature).
During a power failure when battery back-up is in use, you may experience a
delay of up to 4 seconds before dial tone is heard.
Network Lock
The CellRoute-GSM has a network lock feature. This is a network security
function. (For further details please contact your service provider)
SIM PIN Lock
The CellRoute-GSM has a SIM card PIN lock feature. This is a SIM card security
function. (For further details please contact your service provider)
Confidence Tone
It is possible to turn confidence Tone ON or OFF
Confidence Tone ON dial 0##561#
Confidence Tone OFF dial 0##560#
You will hear an acceptance tone once the digits have been dialled.
Ringing Cadence
It is possible to adjust the ringing cadence for incoming calls to cell route
To change dial 0##8 (1 – 4)
1=USA, 2=UK, 3=SPAIN, 4=ETR
You will hear an acceptance tone once the digits have been dialled.
•
Data
Please refer to Data documentation.
•
PC Fax
Please refer to Fax documentation.
