OneStream GFX Quick Start Guide
3
2
Programming
By default:
The Default routing plan will route all calls from the PBX to GSM and will route all incoming calls from
GSM to the PBX.
If you wish to change the routing plan (e.g. to only allow calls starting 08 to go to GSM) then use the
following procedure:
When OneStream starts up, it will try to find a DHCP Server to obtain an IP Address automatically.
If it does not find a DHCP server, it will use its default IP Address of 192.168.0.1.
2.1
Setting up your PC
In order to access the OneStream Web Interface and program the unit your PC must be set to a
compatible IP Address e.g. 192.168.0.2. To change the IP Address of your PC:
1.
Click on the Start menu,
Control Panel (if you do not
see the display like this then
click on “Switch to Classic
View”):
2.
Double-click on Network
Connections:
