background image

 lo Know Your Commander

Facsimile

Commander HX

Facsimile machines may be connected, as stations, to any of the HX

systems. The HX308 provides extra facilities as detailed below. For

the larger systems, calls intended for the facsimile machine must

first be answered and then transferred in the normal way.

HX308 Only

On the Telecom Commander HX308 up to two facsimile machines

may be allocated for one touch transfer. An incoming call intended

for the facsimile machine can be transferred by pressing the [FAX]

key. If two facsimile machines are used, the call will be connected

to the first free machine.

To Forward an Incoming Call Intended for the Facsimile

Machine:

Answer the incoming call

Hear 

 

l

Press the [FAX] key

1

Replace the handset

  J a n  

 

The [FAX] 

LED 

indicates the 

status 

of the facsimile machines 

follows:

Page   12

Commander HX

Group listening

 to Know Your Commander

This facility enables the keystation speaker to be turned on while

the handset is in use. This allows both sides of a conversation to be

heard over the loudspeaker.

To Activate Group Listening:

Make a call using the

handset

Press the

  I D

:

 key

Dial * 0

 

 

The keystation speaker 

turns on

Continue the conversation

 

 

using the handset

 Group listening is de-activated automatically when the call is

terminated.

To De-activate Group Listening While a Conversation is in

Progress:

Press the

  I D

:

 key

Dial * 0

( H o n . 1 1   J a n  

 

The 

 speaker 

turns 

 the conversation may be contin-

ued as normal

Page 

 13

Summary of Contents for Commander HX

















































Reviews: