14
ANNEX: DEFINITION OF FUNCTION SETTING TERMS
Note
：
Make sure the e-Card setting matching the remote control hardware setting. i.e. Dual Motor
only available to the remote control with double step button models.
Function Setting
Definition
Normal
The relative relay is “ON” when the pushbutton is pressed
and held; and relay is
“off” when the pushbutton is released.
Toggle
Maintained function: the relay is operated by pressing and releasing. Press the
pushbutton and release once for “on”; press and release again to turn off the
relay.
ON/OFF
Both pushbuttons are used to operate the same relay. Press the ON pushbutton
to activate the relay and press the OFF pushbutton to de-activate the relay.
Magnetic ON/OFF
Both pushbuttons are used to operate the same relay. Press the “Magnetic ON”
pushbutton to activate the relay. If the operator wants to de-activate the relay,
he must keep pressing the “Magnetic ON” pushbutton and then press the
“Magnetic OFF” pushbutton in the
meantime. The purpose is to prevent the
operator from accidentally pressing the “Magnetic OFF” pushbutton and
dropping the load held by the magnetic sucking disc.
ON/OFF/ON
Two relative pushbuttons are set to control two relay outputs. As these two
pushbuttons work individual, they are acting as” Toggle”. However, if these two
pushbuttons associating together, as the first relay turns on, if you need to
change into the second relay turns on, then this setting will be forced to shut
down the first one, then the operator must press the button again to turn the
second relay on. This function can prevent an instant reverse motor operation; it
is helpful to prevent accidental damage.
Hydraulic Pump
1.
This function allows a pushbutton having an auxiliary relay output, mainly
used on hydraulic motors and hydraulic valves.
2.
Pump On Time & Pump Off Time: According to the application, the relay
starting time could be set from 0.1s~15 min as ADVANCE, DELAY, or
SIMUTANEUOSLY.
3. Hydraulic Control
：
Select the button group (#1~15) with hydraulic pump.
