Dual 40/50/100A Configurable Breaker Panel
Power
:: T009-5XXXXXXXXXXX
© Telect, Inc., All Rights Reserved, 118267-3 A0
1.509.926.6000 :: telect.com
2
Installation Guide
Mechanical
Specifications
Dimensions (nominal), without brackets*
Width: 17.25" (43.82 cm)
Height: 1.75" (4.44 cm)
Depth: 8.00" (20.32 cm)
Weight without breakers
9 lbs (4.08 kg)
Weight, shipping
10.5 lbs (4.76 kg)
Mounting for standard racks
EIA: 19" (48.2 cm)
WECO: 23" (58.4 cm)
ETSI: 21" (53.3 cm)
[Kit sold separately. See “Accessories” (Page 7).]
Ground terminals
Quantity:
Stud:
Lugs:
Cable:
Torque:
2
M5 with hex nut. [Use 8mm
(5/16 in.) socket.]
Single or dual-hole compression lug [5/8 in.
(1.59 cm) center to center]
Up to #10 AWG for single-hole lug
Up to #6 AWG for dual-hole lug.
(Conductor size depends on input
interruption device.)
20 in.-lb (~2.25 N•m), max.
Input terminals — Compressions
Quantity:
Stud:
Lugs:
Cable:
Torque:
4 — 2 BATT, 2 RTN
M5 with KEPS nut. [Use 8 mm
(5/16 in.) socket.]
Dual-hole compression lug
[5/8 in. (1.59 cm) center to center]
Up to #1 AWG, depending on input
interruption device
20 in.-lb (~2.25 N•m), max.
Input terminals — Phoenix-style screw-tight
Slotted screwhead for wire clamping up to
#6 AWG, depending on input interruption
device. Torque screws to 14 in.-lb (~1.5 N•m).
Output terminals — Wire binding
Quantity:
Screw:
Cable:
Clearance:
Torque:
28 — 14 BATT, 14 RTN
#6 Phillips** pan head
Up to #10 AWG
0.31 in. (.79 cm) between terminal barriers
9 in.-lb (1.02 N•m), max.
Alarm terminals — Wire binding
Quantity:
Screw:
Cable:
Torque
6
#4 Phillips** pan head
#30 to #16 AWG
4 in.-lb (0.45 N•m), max.
Specifications
* See Page 11 for
exact dimensions
** Screws with
cross-recessed heads
