Teledex B150D, User Manual

FIGURE 4

21) CALLER ID MESSAGES

22) USING THE DIAL KEY

You can quickly dial a Caller ID number by simply pressing the 

DIAL

key.

NOTE:

You must store your home area code in order to use this feature. If you are calling a 
number that originated in your home area code, the Caller ID record will show only 
the seven digit number (without an area code.)

Follow these steps to dial a number from a Caller ID record:

1)

Repeatedly press 

REVIEW

or 

REVIEW

to select the desired Caller 

ID record. If the displayed phone number matches your phone system’s 

dialing pattern, press 

DIAL

twice to dial the number. If the phone number 

does not match your phone system’s dialing pattern, follow steps 2 

through 4 below.

2)

Press 

DIAL

. The messages 

DIALING MENU

and 

USE REVIEW KEY

alternately flash

on the display.

3)

Repeatedly press 

REVIEW

or 

REVIEW

to select the desired dialing patterns.

4)

Press 

DIAL

. The phone number appears in the display. After the B150D 

dials the number, the message 

PICKUP PHONE

appears in the display.

NOTES:

If the phone number’s area code matches the area code you have stored, the Caller ID
provides you with four dialing pattern choices: an 8-digit number (1 plus the phone 

5) USING THE DATA PORT

The data port is located on the right hand side of the telephone (as it is facing you.)

Use this jack to connect a laptop or desktop computer, fax machine or answering

machine in parallel on the same phone line to which the telephone is connected. 

Plug one end of the modular cord into the 

DATA

jack of the B150D, and then plug 

the other end into the jack of another phone or answering machine.

6) SETTING THE RING CADENCES

Follow these steps to select one of four different ringer cadences (telephone must be

on-hook):

1)

Press 

PRGM.

The 

PROGRAM MODE

prompt will appear.

2)

Press 

REVIEW

. The 

SET RING TONE

prompt will appear.

3)

Press 

REVIEW

or  

to sample the available ring tones.

4)

Press 

PRGM

key to select the desired ring tone. The current time

display will return.

Note:

There are four different ring cadences from which to choose. The default is set to 
cadence #1.

7) ADJUSTING THE RINGER VOLUME

Your phone has three ringer volume levels:  

OFF, LOW, AND HIGH.

Follow these steps to

adjust the ringer volume (telephone must be on-hook):

1)

Press 

VOLUME

or 

VOLUME

to adjust the ringer volume. 

2)

To turn off the ringer volume, repeatedly press 

VOLUME

until the

ringing stops and the ringer is off. 

3)

To adjust a line’s ringer volume when that line rings, press 

VOLUME

or 

VOLUME

.

NOTE:

The ringer volume is preset to “Low.”

8) SETTING THE DATE AND TIME

Follow these steps to set the date and time:

1)

Press 

PRGM

.  The 

PROGRAM MODE

prompt will appear.

2)

Press 

REVIEW

with the month cursor flashing. 

SET DATE/TIME

prompt

will appear.

3)

Enter the desired date using a number key. 

4)

Enter the current time using a number key when the hour cursor flashes. 

*= AM #= PM

appears.

5)

Press 

*

to select AM or 

#

to select PM. The phone beeps and the set time 

display returns.

NOTE:

If you make a mistake on the settings, wait 20 seconds. The backlight LED will turn 
off automatically to exit setup. Then start again at Step 1.

NOTE:

Date and time are preset to January 1 & 12:00 AM 

12

5

Teledex B150D Users Manual

Teledex B150D Users Manual

CALLER ID

DATA PORT

P/N 600-0480-52

Contents Copyright © 2002 Teledex LLC

DISPLAY READS

DESCRIPTION

# TOTAL # NEW

Appears as new calls are received. (#) indicates the number of total calls 
and new calls.

CALL WAITING

Another caller is trying to reach you. The indicator lights.

PRIVATE CALLER

The caller is blocking the name and/or telephone number from being sent.

PRIVATE NAME

Appears when the caller has blocked just the name from being sent.

PRIVATE CALL

Appears when the caller has blocked just the number from being sent.

END OF LIST

You have reached the end of your call records. Press either REVIEW key 
to see them again.

UNKNOWN CALLER

The caller is not within a Caller ID service area. No caller name and
number appear.

UNKNOWN NAME

The caller is not within a Caller ID service area. Only the number appears,
but the name is unknown.

UNKNOWN CALL

Appears when the caller is not within a Caller ID service area.
The number is unknown.

NO CALLS

No new call records are in the Caller ID’s memory.

MSG WAITING

You have a message waiting.

PICK UP PHONE

Appears after the B150D dials a number when you press DIAL.
(see “Using DIAL”).

SET AREA CODE

Prompts you to set the area code (see “Setting the Area Code”)