46
Teledyne API T500U CAPS NO
2
Analyzer with NumaView™ Software
083730510A DCN8172
SETUP MENU: FEATURES/FUNCTIONS CONFIGURATION
Use the Setup menu to configure the instrument’s software features, to gather information
on the instrument’s performance, and to configure and access data from the Datalogger,
the instrument’s internal data acquisition system (DAS). Once the setups are complete, the
saved configurations can be downloaded to a USB drive through the Utilities>USB
Utilities menu and uploaded to other instruments of the same model (Section 2.6).
S
ETUP
>D
ATA
L
OGGING
(D
ATA
A
CQUISITION
S
YSTEM
,
DAS)
The Datalogger can be configured to capture and store user-defined data, which then can
be viewed in the Alerts page, if elected, as well as downloaded from the instrument to a
USB flash drive or using NumaView™ Remote software for examination and analysis.
Figure 2-26 shows a new log; Figure 2-27 shows a sample existing log, which can be edited
or deleted, and Figure 2-28 provides illustrated instructions for setting up a new log, with
Sections 2.5.1.1 and 2.5.1.2 providing additional details.
To transfer captured instrument data to a flash drive see Section 2.5.1.3.
Figure 2-26. Datalog Configuration, New Log Page
Figure 2-27. Datalog Configuration, Existing Log
Summary of Contents for T500U
Page 2: ......
