VUE TZ20-R User Manual
Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is
prohibited. Imagery for illustration purposes only. Specifications are subject to change without notice. Rev. 100.
© 2021 Teledyne FLIR LLC, Inc. Approved for public release. Teledyne FLIR Approved [FLIRGTC-SBA-007]. All rights reserved.
13
5 SD
CARDS
Both SD cards must be inserted to operate the unit. Each Micro SD
card
can be viewed as a storage device for the Vue TZ20-R. To view the
contents on the Micro SD cards, connect the Vue TZ20-R to a
computer using a USB-C cable. The user will be able to copy or
transfer files accordingly. On the X-Port gimbal, there is a Micro SD
card
slot under a protective cover. This port is intended for storing logs by
DJI
and will NOT save data from the Vue TZ20-R.
FIGURE 11. INSERT MICRO SD CARD 1 AND 2
TO OPERATE VUE TZ20-R
5.1 File Naming Convention
Folders on the Micro SD cards are named with the following convention.
GPS data is required to sync the date and time. If GPS data is unavailable, the file names will report a default
time of “1970” (ex: Image_19700101_000027). This can be prevented by ensuring that the airframe is connected
to GPS prior to taking an image capture. Saved images and videos are named with the following convention.
Image_20210126_231251
Contents
Image: JPEGs & TIFFs
MOV: MOVs
SEQ: Multipage TIFFs
Date Folder Created
Format: YYYYMMDD
Time Folder Created
Format: HHMMSS
20210126_231253_5x_8b.JPG
Suffix & Extension
JPEG: Zoom Level (“1x”, “5x”, “10x” or “20x”), 8-bit color
TIFF: “NFOV” or “WFOV”
MOV: “STR”
SEQ: “NFOV” or “WFOV”
Date Folder Created
Format: YYYYMMDD
Time Folder Created
Format: HHMMSS
