VUE TZ20-R User Manual
Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is
prohibited. Imagery for illustration purposes only. Specifications are subject to change without notice. Rev. 100.
© 2021 Teledyne FLIR LLC, Inc. Approved for public release. Teledyne FLIR Approved [FLIRGTC-SBA-007]. All rights reserved.
21
11 TROUBLESHOOTING
TABLE 2: LED INDICATION TABLE
Boot up –
Yellow flashing slow
The LED will flash yellow when the Vue TZ20-R is booting up.
Not connected –
Blue solid
The LED appears solid blue when the Vue TZ20-R is powered but not able to
connect to UAS, and both SD cards are inserted. Normally occurs when Vue
TZ20-R is connected to a computer.
Operating -
Green solid
The LED appears solid green when the Vue TZ20-R is powered up and ready
to record/stream.
Recording -
Green flashing slow
The LED appears flashing green when streaming video is being recorded to the
storage.
Warning -
Orange blinking fast
The LED will flash orange when there is an error, but the Vue TZ20-R is still
running. Reasons for this kind of warning include:
Fail to record (no Micro SD card, or Micro SD card full)
Camera error (but VueTZ20-R can communicate with Camera)
Fatal error -
Red flashing fast
The LED will flash red when there is a fatal error in the Vue TZ20-R including:
Cannot boot
Cannot communicate with the Boson camera(s).
Upgrade -
Purple flashing slow
The LED will flash purple when the firmware upgrade process is active.
LED indicator priority
When two or more conditions are fulfilled at the same time the priority shall be
as follows. The condition that is first met shall be indicated.
1. Fatal error
2. Boot up
3. Upgrade
4. Warning
5. Recording
6. Not connected
7. Operating
