49391
Revision 3
18
Gasurveyor 700
USER MANUAL
4. Bump Due enabled - if overdue, user acknowledge is required. As shown in
Figure 11:
Warm-up - Bump Overdue
.
If bump is due, the user must either:
• Press
Continue
for monitor warm-up to continue.
• Press
Switch Off
to switch OFF the monitor.
Figure 11: Warm-up - Bump Overdue
3.3.4 Calibration and Service Due Dates
Calibration and Service Due dates are displayed below the Bump Due date as shown in
Figure 10:
Warm-up - Due Dates
.
Calibration Due date can be set from 1 to 400
days
and Service Due date can be set from 1 to
36
months
.
The Calibration Due date is automatically updated when all ranges of the monitor are successfully
calibrated.
The monitor has five options to alert the user when calibration or service is overdue:
1. Calibration / Service Due disabled - no date is displayed. The monitor does not require a
valid calibration or service to operate.
2. Calibration / Service Due enabled - if overdue, monitor is switched off.
3. Calibration / Service Due enabled - if overdue, the monitor warm-up continues automatically.
4. Calibration / Service Due enabled - if overdue, user acknowledge is required. As shown in
Figure 12: Warm-up - Calibration Overdue
.
If calibration or service is due, the user must either:
• Press
Continue
for monitor warm-up to continue.
• Press
Switch Off
to switch OFF the monitor.
Figure 12: Warm-up - Calibration Overdue
