3 – Operating software
3-10
© Teledyne Limited
DPN 402197 Issue 7.1
Configura-
tion
System parameters
[Shift + F2]
This command displays a dialog panel that allows you to establish the
type of SEP and the serial communications parameters. Refer to the fol-
lowing sections for relevant details and instructions.
Altimeter
[Shift + F3]
This command displays a dialog panel that allows you to establish the
physical and serial communications parameters of an altimeter used with
the 350 system. See
for relevant details and instruc-
tions. The System Configuration Wizard also displays a similar dialog
panel.
External Output
[Shift + F5]
This command displays a dialog panel that allows you to configure the
topside computer output to an external data logger. Set the type of data
packet and its update rate, and the serial port communication parame-
ters.
Note that you must establish appropriate parameters for the external out-
put if you wish to use the video overlay option, even if you do not intend to
use the external data logging features.
Analogue Output
[Shift +F6]]
Not used.
Load factory
Defaults [Shift + F9]
This will prompt you with a caution box to confirm that you would like to
reset the software back to the original factory defaults. This will eliminate
any user parameters that have been previously configured.
Video Overlay
Setup [Shift + F10]
See
for a description of the video overlay feature.
System Configura-
tion Wizard [Ctrl +
F10]
This selection will return you to the set-up options screen that you have
viewed when opening up the software. Use of this option will result in all
of the parameters being reset to default.
Window
Cascade
[ALT][W][C]
Use this command to arrange the various operating windows so that they
overlap but with their title bars visible. This does not affect the Diagnos-
tics Window or the Target Tracking Window.
Tile Horizontally
[ALT][W][H]
Use this command to arrange the various operating windows so that they
are next to each other horizontally. This arrangement allows you to see
the entire area of each window, although DeepView might resize the win-
dows to fit the available area. This does not affect the Diagnostics Win-
dow or the Target Tracking Window.
Tile Vertically
[ALT][W][V]
Use this command to arrange the various operating windows so that they
are next to each other vertically. This arrangement allows you to see the
entire area of each window, although DeepView might resize the windows
to fit the available area. This does not affect the Diagnostics Window or
the Target Tracking Window.
Table 3-1: DeepView Menu Commands (Continued)
Menu item
Sub-menu,
[hot key access]
and Function key
Description