3 – Operating software
3-8
© Teledyne Limited
DPN 402197 Issue 7.1
3.3.1 Menu commands
lists the commands available on the DeepView Menu Bar, together with their hotkey access
codes and function keys where available.
Table 3-1: DeepView Menu Commands
Menu item
Sub-menu,
[hot key access]
and Function key
Description
File
Open /Close Replay
File [F2]
Specify the name and location of an existing internally logged file that you
wish to replay through DeepView. The Replay Window includes the same
features and as the Run Window and operates in a similar way. A button
on the DeepView toolbar performs the same function as this command.
You cannot use DeepView to replay externally logged files.
New Log File
[F3]
Specify the name and location of a new file to accept the internal logging
record. File names can have up to 255 characters. They can include
spaces but must exclude the characters \ / : * ? ” < > and |. A button on
the DeepView toolbar also performs the same function as this command.
Close Log File
[Ctrl + F3]
If you have an internal logging file open, use this command to close it.
Once you have closed the file, you cannot open it again to add more data.
Backup Configura-
tion
This will prompt you with a dialog box to provide a name to save the cur-
rent parameters set to a file that can be accessed at a later date.
Restore Configura-
tion
This will provide you with a list of any previously saved configuration files
that you can load.
Print Configuration
Use this command to send a copy of the 350 system configuration to win-
dows Notepad. You should print the configuration details from that appli-
cation at the start of the survey and again at the end of the survey. Retain
the hard copy prints with the survey records.
Exit
Use this command to exit the DeepView program and return to the Win-
dows operating environment.