Operator's Manual
Generating an Arbitrary Waveform
WaveStation offers several built-in Arbitrary waveforms for selection, all of which can be further adjusted to
your needs.
1. Choose your output channel by pressing the
Ch1/Ch2
function button until the correct tab is active on the
display.
NOTE
: WaveStation defaults to the Channel 1 tab and Waveform menu whenever you power on, although
you can
change this setting
on the Utility menu. If Channel 1 is correct, skip to Step 2.
2. Press the
Waveform
function button to open the Waveform menu, then press the
More 1 of 2
softkey.
3. Press the
Arb
softkey, then press the
Built-in
softkey. The display changes to show the first group of built-
in arbitrary waveforms.
4. Press the softkeys to select different groups until you find the desired waveform, then turn the
Adjust knob
until the waveform is highlighted white on the LCD.
5. Press
Done
to complete the selection. The LCD returns to the regular waveform display, where you should
see a diagram of the selected wave shape.
6.
Adjust parameters
as necessary using either the knob or the keypad.
7. When all parameters are set, press the appropriate
Output
button to begin outputting the waveform.
S
EE
A
LSO
:
Generating Basic Waveforms
Generating DC Waveforms
Recalling Stored Waveforms
922869 Rev B
15
