150
ProEM System Manual
Issue 3
C.3
Adjustable C- to Spectroscopy-Mount Adapter (7050-0104 for
SP2350/SP-2550)
Assembly Instructions
1. Verify the shipping cover has been removed from the spectrograph’s camera port.
2. Place the flat side of the adapter plate against the face of the camera.
3. Insert the threaded insert through the center hole in the plate and screw the
adapter into the camera's C-mount.
4. Gently rotate the camera and sliding tube assembly as you insert it into the
spectrograph.
NOTE:
5.Secure the sliding tube with the two spectrograph
setscrews (one coming down from Adapter parts are
machined to provide a tight fit. If you need to remove the
sliding tube from the spectrograph, first loosen the two
setscrews that secure it, and then rotate the tube as you pull
it out. If you have removed the sliding tube from the
spectrograph, rotate the sliding tube as you re-insert it, and
tighten the setscrews afterwards to secure it. Forcing the
tube into the spectrograph could permanently damage the
tube and the spectrograph opening.
Item
Qty
P/N
Description
1
1
Adapter Plate
2
1
2518-1284
1.25"-32 Threaded Insert
2
1
4
4
11-
01
26
_
0
102
Summary of Contents for ProEM Series
