T3PSX3200P Series User Manual
140
:SEQUence[1|2]:GROUPs <value>
Description
Sets the output group number of sequence.
Parameter
<value> The definition of output group number
is that the default voltage/current
group number of power output from
each cycle ranges from 1 to 2048. All
group number of sequence = output
group number*cycle number. Power
will terminate timer function after
completing outputs of all group
numbers.
Example
:SEQUence2:GROUPs 25
Sets the CH2 output group number of sequence as
25.
:SEQUence[1|2]:GROUPs?
Description
Queries the output group number of the sequence.
Example
:SEQUence2:GROUPs?
Queries the CH2 output group number of the
sequence. Returns to an integer between 1 to 2048.
:SEQUence[1|2]:PARAmeter<No>,<volt>,<curr>,<time>
Description
Sets the parameter of the specified group.
Parameter
<No>
The serial number of sequence
parameter of the specified group,
integer, 0 to 2047.
<volt>
The voltage of sequence parameter of
the group. Unit is V, number, voltage
range of the active channel.
Summary of Contents for T3PS13206P
