T3PSX3200P Series User Manual
168
Note
The :SYSTem:COMMunicate:LAN:APPLy command
must be executed before the DHCP settings can take
effect.
Example
:SYSTem:COMMunicate:LAN:DHCP ON
Enable DHCP
:SYSTem:COMMunicate:LAN:DHCP[:STATe]?
Description
Query the DHCP status.
Example
:SYSTem:COMMunicate:LAN:DHCP?
Query the DHCP state.
:SYSTem:COMMunicate:LAN:IPADdress <IPaddress>
Description
Sets the IP address.
Parameter
<IP address> ASCII string, within the range of
1.0.0.0 to 223.255.255.255 (excluding
127.nnn.nnn.nnn).
Note
This command is only applicable for the manual IP
mode. The SYSTem:COMMunicate:LAN:APPLy
command needs to be executed before the IP address
settings can take effect.
Example
:SYSTem:COMMunicate:LAN:IPADdress
Sets the IP address to 172.131.161.152.
:SYSTem:COMMunicate:LAN:IPADdress?
Description
Queries the IP address.
Example
:SYSTem:COMMunicate:LAN:IPADdress?
Queries the IP address.
Summary of Contents for T3PS13206P
