2.7 Save and Recall
Five group setups can be saved in memory. The contents of the setup file
include:
●
Independent/series/parallel mode
●
Output voltage/current value
●
Timer setup
Save Setup
1. Set the state that you want to save.
2. Short press the “IP/Store” button, then long press the “IP/Store” button to
enter Store/Recall interface.
3. Press the direction button to move the cursor to “FILE CHOICE”.
4. Select file store position( FILE1~FILE5) by revolving the multi-
function knob.
5. Press the direction button to move the cursor to “OPER CHOICE”.
6. Move the cursor to “STORE” by turning the multi-function knob, then press
it to save the current setup.
Recall Setup
1. Short press the “IP/Store” button, then long press the “IP/Store” button to
enter Store/Recall interface.
2. Press the direction button to move the cursor to “FILE CHOICE”.
3. Select the desired file by turning the multi-function knob.
4. Press the direction button to move the cursor to “OPER CHOICE”.
5. Move the cursor to “RECALL” by turning the multi-function knob, then
press it to recall the saved setup.
Note:
if you want to delete the file that has been saved, after selecting
the file in step 3 above, move the cursor to “DELETE”, then press the multi-
function knob.
18 Quick Start
