Quick Start Guide
PAGE 18
3.4. Setup TCP/IP (Network)
To setup TCP/IP, please follow either of the methods below.
3.4.1.
By OSD menu
1. Press
[Menu]
button
select
[SETUP]
[CONNECTION]
[TCP/IP]
2. Select
“NO”
for
[Auto IP]
if you want to change IP address, mask or gateway.
Modify the corresponding fields
3. Wait for the system to save the setting or exit from
[MAIN MENU]
to save the
settings
3.4.2.
By IP Setup Utility
1. Install
TeleEye
IP Setup Utility software by the software CD. .NET framework is
needed for IP Setup Utility operation. You can find .NET framework installer in the
software CD.
2. Run IP Setup Utility.
3. Find your RA digital video recorder according to the serial number provided by your
provider.
4. Make sure the gateway is the same as your router.
5. To assign another IP address, mask or gateway, click to uncheck “
Obtain an IP
address automatically
” and enter the corresponding information.
6. Click on
[Apply]
to save the changes.
Setup TCP/IP (Network)