TSA-1000
© 2008
–
2012 Telefire Fire & Gas Detectors Ltd
Revision 1.12
האיגש
!
אצמנ אל הינפהה רוקמ
.
2
– Page 46 of 46 –
!
Warning
Forgotten passwords require factory reset: if you lose or forget the
password, the panel must be sent back to the factory to be initialized.
There is no field option for gaining access to the panel without a valid
password.
Once you have changed the password, it is important that you write it
down somewhere and store it in a safe place.
11.7
Connecting a TDM-500i Dialer
11.7.1
Dialer Configuration
Verify that dialer software version is revision 2.01.08 or higher (see label on TDM-500i).
Press
Prog
– the display shall show "
_.
" enter the password (default
2222
). The display
shall show
P
.
Press
1
. The display shall show
d
.
Press
Display
Configuration
Range
Default
6
–
Selection of A and B input polarity"
11 – A positive, B positive
(option exists only from software
revision 2.05.01)
00 – 11
01
Configure the dialer for positive activation of both input A and input B (11).
11.7.2
Dialer Connection
Figure 17 Connecting a TDM-500i Dialer (W/W rev C5, S/W rev 2.05.01)
