TSA-200 / TSA-200XT / TSA-240 / TSA-240XT
© 2010 –
2014 Telefire Fire & Gas Detectors Ltd
Revision 1.06 July 2014
Page 34 of 79
•
The name and telephone number of the installing company and of the service
reresesntative should be clearly marked on the panel itself or on an attached
document
See a sample document at the end of this manual.
10.7
Connecting a TDM-500i Dialer
10.7.1 Dialer Configuration
Verify that dialer software version is revision 2.01.08 or higher (see label on TDM-500i).
Press
Prog
– the display shall show "
_.
" enter the password (default
2222
). The display
shall show
P
.
Press
1
. The display shall show
d
.
Press
Display
Configuration
Range
Default
6
–
Selection of A and B input polarity:
11 – A positive, B positive
(This option exists only from software
revision 2.05.01)
00 – 11
01
Configure the dialer for positive activation of both input A and input B (
11
).
10.7.2 Dialer Connection
Figure 9 Connecting a TDM-500i Dialer (H/W rev C5, S/W rev 2.05.01 or higher)
i
Note
The dotted lines in Figure 9 are required only for error message notifications.
Configure the dialer (option 6) to 11.
