20
20
and structure is reduced. Selecting a smaller
numeric setting narrows the band, and
shows greater variation in bottom
composition. Selecting "OFF" turns the
White Line feature off.
Note: The White Line setting is
retained in memory when the 160 is
turned off. The factory setting is
"OFF".
D
EPTH
A
LARM
activates a shallow water depth
alarm. The alarm will sound when the digital
depth becomes equal to or less than the setting.
The tone sounds at a rapid rate for several
seconds and then sounds intermittently until the boat moves to deeper
water. The Depth Alarm can be muted by pressing the C
ONTROL
P
ANEL
knob; once muted the alarm will not sound again until the boat moves
to water greater than the Depth Alarm setting. Remember, depth is
measured from the transducer, not the surface of the water.
The Depth Alarm setting is not retained in memory when the
160
is turned off.
S
IMULATOR
allows the
160
to operate in simulated sonar mode. This is
useful for learning the features and functionality
of the
160
when not on the water. When
operating with the simulator on and without a
transducer connected the
160
does not
remember any changes to settings.
The Simulator setting is not retained in memory when the
160
is turned off.
USING THE 160
CONTROL PANELS
White Line Screen
Summary of Contents for TFX160
Page 1: ...TFX160 Operations Manual...
Page 30: ...A Division of Teleflex Marine...