8
B
. Connection using Ethernet cable
Connect the yellow Ethernet cable (
3
) to the Ethernet card
on the PC and to one of the router’s connectors labelled as
ETHERNET 1X
a
4X
Switch the PC on. The
ETHERNET
indicator will light up in
green after a few seconds. This LED will blink when transfe-
ring data.
5. Connect to the wireless network using the
Connect
button.
6. Check to make sure that the wireless network connection
icon for the system tray indicates that the connection has
been correctly established.
DSL
4
3
2
1
12
V DC
1.0
A
ETHERNET
RESET
ON
OFF
DSL
4
3
2
1
12
V DC
1.0
A
ETHERNET
RESET
ON
OFF
3
3
For further information please refer to the User’s manual on the Advanced Settings CD, Section 3.4.